Editorial Topics
Browse by topic
Every blog post lives inside one of these topics. Pick a pillar to see the featured guide, supporting articles, and how it connects to the rest of the quality engineering stack.
- PPAP and Submission13 articles in this topicPPAP is the contract that proves a supplier can build a production part to spec, every time. It bundles the design record, process flow, PFMEA, control plan, MSA, capability study, dimensional results, and customer specific paperwork into one submission that an OEM signs off before approving production. Quality engineers live in PPAP, but most teams still run it on a spreadsheet, a shared drive, and a prayer. The guides in this topic walk through the 18 elements, the submission levels, the gotchas that hold up signoff, and what changes when a platform owns the document trail instead of a human.Open hub
- APQP and Launch4 articles in this topicAPQP is the five phase process that takes a new part from concept to mass production without surprises. Done well, it forces cross functional alignment early, catches design risks before tooling is cut, and gives the launch team a clear path to PPAP approval. Done badly, it becomes a binder of templates nobody reads. The guides in this topic cover what each phase actually requires, how the deliverables chain together, and how AI APQP changes which steps a human still has to do by hand. Useful for engineers running a launch and for managers trying to compress launch timelines without breaking quality.Open hub
- FMEA and Risk4 articles in this topicFMEA is how quality engineers turn fuzzy worry about what could go wrong into a ranked, actionable list. The Process FMEA in particular drives the control plan, sets up the PPAP submission, and gives the team a shared language for risk. The catch is that most PFMEAs are stale the moment they are signed, drift from the actual line, and never get updated when a process change ships. The guides in this topic cover modern AIAG VDA scoring, how to keep a PFMEA living, and how AI assisted PFMEA tooling cuts hours of typing while keeping the engineering judgment in human hands.Open hub
- Audits and Compliance15 articles in this topicAudits are where the gap between what your QMS says and what your team actually does becomes painfully visible. Whether the auditor is IATF, AS9100, ISO 9001, VDA 6.3, or a customer second party team, the rituals look similar, the findings look similar, and the prep work is rarely as ready as anyone claims. The guides in this topic cover the practical checklists, the clauses most commonly missed, and how to keep an audit ready posture without dedicating a person full time to staring at the document control system. Written for engineers who would rather pass an audit than perform one.Open hub
- CAPA, 8D, and Corrective Action6 articles in this topicA CAPA process exists so that the next defect, escape, or audit finding gets fixed at root cause instead of patched and forgotten. In practice most teams stall in containment, copy paste a fishbone, and close the CAPA when the customer stops emailing. The guides in this topic cover how 8D and CAPA relate, what closeout actually requires under IATF and customer specific terms, and how a tighter CAPA workflow shortens cycle time from weeks to days. Useful for the engineer running a corrective action right now and for the manager tired of watching the same defect come back next quarter.Open hub
- Measurement, MSA, and SPC5 articles in this topicMeasurement system analysis and statistical process control turn measurement into evidence. Without them, every dimensional result is just an opinion. With them, the PPAP submission, the control plan, and the day to day decisions on the line all rest on numbers you can defend. The guides in this topic cover Gauge R and R acceptance criteria, the difference between Cpk and Ppk and when each one applies, and how a control plan ties measurement frequency to process capability. Useful for the engineer setting up a new study and for the team trying to interpret last week is data without restarting the argument from scratch.Open hub
- Product and Platform Updates6 articles in this topicNew features, capability releases, and how the QualityEngineer.ai platform itself is evolving. These posts are written for existing customers who want to know what shipped and for prospective users who want to see how the product actually changes month over month. Expect launch notes for Blueprint Intelligence, AI APQP, supplier portal, and the rest of the suite, plus the occasional behind the scenes piece on how we build it. Lower density on standards content, higher density on what is new.Open hub
Stop managing PPAP in spreadsheets
QualityEngineer.ai automates the documentation-heavy parts of quality engineering: PPAP, supplier assessments, document analysis, and more.